Table Electronic Tensile Machine BGD572

Products

    Lab & Analytical Lab & Analytical

Table Electronic Tensile Machine BGD572

  • LOGIN FOR MORE INFO

The Tensile Machine is also called Tensile Testing Machine or Universal Material Testing Machine. It is mainly used for tensile test (you also can call it stress-strain tester), they usually clip both ends of the material sample in two clamps which are a certain distance apart. Both of clamps separate and extrude the sample at a certain speed, testing the stress change which happens to the sample, and end of the test until the machine destroyed; recording the maximum and displacement during the test at the same time, so you can calculate the tensile strength, shear strength, peeling strength, yield strength, ring crush strength etc through the software. The tensile test is one of the most widely used methods in studying material mechanical strength, and it needs to adopt the constant speed.

In the present market , the tensile machine has mostly been adopted the design of electromechanical integration, which is consist of Main Part, Mechanic Part, Hydraulic System, Force Measuring System etc, the Force Measuring System is made up of Force Sensor, Transmitter, Microprocessor, Load-driving Mechanism and Computer.

 

This is a Table Electronic Tensile Machine attached with the micro printer, it can not only can test the tensile strength, compressive strength and extension length of all kinds of material, semi-finished products and products, but also do the testing of stripping, tearing, bending, flexural, compression etc. Therefore, it is calculate the tensile strength, shear strength, peeling strength, yield strength, ring crush strength etc through the software.


Share

■ Max. Capacity (Optional): 50N、100N、200N、500N、1000N
■ Test range of test force:0.4%~100 FS ( full range)
■ The indicated error of test force:≤ ±0.5%
■ The resolution of test force:±1/250000 of max. force, there is no grades in the whole process ,and the process keep the constant resolution
■ The valid length of tensile:800mm (clamp is not included)
■ The error of indicated displacement:≤ ±0.2% (indication)
■ The resolution of displacement: 0.015mm
■ The range of test speed: 50~500 mm/min(adjustable)
■ External dimensions:55×45×135cm
■ Weight:75Kg
■ Power Supply:220V/50Hz
■ Power:120W