Large Direct-Pure EDI Lab Water Systems(mini)

The Large Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of product water is above 5 MΩ·cm (25 ℃), which meets or exceeds Type Ⅱ water quality standard defined by ASTM, CAP, CLSI and ISO 3696/BS 3997, the European and U.S. Pharmacopoeia. The System is designed for users who need 400 to 1800 liters of Type II water per day.

More Information
Technical Specs

Type II Pure water can be used in many areas. Some of the typical applications are:
Preparation of bio-reagents
Preparation of culture media
Preparation of solution for chemical analysis such as HPLC, ICP etc.
For clinical analyzers
Feed water for ultrapure water systems
Medical device and equipment rinsing
For serum and blood fractions
For ophthalmics

Feed Water Requirements
Tap water*	Municipal water, TDS < 1000 ppm (2000 μS/cm)
Operating Temperature	5～45 ℃
Feed Water Pressure	2 - 6 bar (30 - 90 psi)
Product Water Flow Rate	Typically 30, 60, 125, 250 or 500 L/h (at 25 ℃)
Product Water Quality
Resistivity	> 5 MΩ·cm @ 25 ℃ (typically > 10 MΩ·cm @ 25 ℃)
TOC	< 30 ppb
Particle (> 0.2 μm)	< 1/ml （with a 0.2 μm final filter）
Microorganisms	< 0.1 cfu/ml （with a 0.2 μm final filter）
Pyrogens (endotoxins)	< 0.001 Eu/ml （with a terminal ultrafiltration cartridge）
Dimensions
Length x Depth x Height	40.0 cm X 49.0 cm X 110.0 cm
Power	< 750 W

*If water hardness is greater than 120 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.