Singapore 
More Categories
Collapse
Construction Smoothing of Concrete Surfaces
Repairing mortar for finishing and smoothing of concrete surfaces.
| Formulation | Parts |
| Portland Cement CEM I 52.5 | 34 – 42 |
| Hydrated Lime | 2 – 4 |
| Microsilica | 2 – 5 |
| Quartz Sand 0.1 – 0.3 mm | 46 – 56 |
| Light Weight Filler | 1 - 3 |
| BERMOCOLL Cellulose Ether (low to medium viscous) | 0.05 – 0.15 |
| ELOTEX Hydrophobic Additive | 0.2 – 0.4 |
| ELOTEX Redispersible Powder | 3 – 5 |
| Water | approx. 22% |
We recommend the following AkzoNobel products for this formulation:
| Redispersible Powder | Hydrophobic Additive | Cellulose Ether |
| FX7000 | SEAL80 | M 10 |
| TITAN8100 | SEAL200 | ML 11 |
Own Formulation
We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant.
Please Note
This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.
Construction 
